APS Logo

An in-situ Strain Manipulation Stage

ORAL

Abstract

Complex transition metal oxides, because of their correlated d electrons, feature a rich phase diagram of interplay between spin, charge, and orbital degrees of freedom. It has been demonstrated that strain engineering is a powerful tool in the exploration of this phase diagram. However, the strain achievable by existing techniques is limited to either discrete/small [1][2] values or specific symmetries/directions [3][4]. Recent advances in strain tuning capabilities of freestanding oxide membranes have demonstrated the potential in realizing continuous control of strain in arbitrary symmetries [5][6]. In this work, we report our recent development of an in-situ mechanical manipulation stage and illustrate its capabilities with preliminary results of tuning prototypical oxides.





[1] D. G. Schlom et al., Annu. Rev. Mater. Res. 37, 589–626 (2007).

[2] C. R. Zhu et al., Phys. Rev. B, 88, 121301 (2013).

[3] K. Edalati, Adv. Eng. Mater. 21, 1800272 (2019).

[4] H. H. Kim et al., Science 362, 1040–1044 (2018).

[5] S. S. Hong et al., Science 368, 71 (2020).

[6] R. Xu et al., Nat. Commun. 11, 3141 (2020).

Presenters

  • Xin Wei

    Stanford University

Authors

  • Xin Wei

    Stanford University

  • Bai Yang Wang

    Stanford University, Stanford University, SLAC National Accelerator Laboratory

  • Yonghun Lee

    Stanford University, Stanford University, SLAC National Accelerator Laboratory

  • Yijun Yu

    Stanford University, Stanford University, SLAC National Accelerator Laboratory

  • Aviv Simchony

    Stanford University

  • Kevin J Crust

    Stanford University

  • Harold Hwang

    Stanford Univ, Stanford University