APS Logo

Hydrodynamic electron flow in a graphene-based device with engineered edge conditions

ORAL

Abstract

Hydrodynamic electron flow is expected to emerge in the regime where electron-electron interactions dominate over all other interactions. In this regime, electrons should flow like a viscous fluid. Evidence of such behavior in graphene has been found experimentally in the form of superballistic flow through constrictions [1] and negative local resistance measurements [2]. Hydrodynamic electron transport may strongly depend on boundary conditions, which can range from no-slip (all tangential momentum is dissipated at the boundary) to no-stress (the boundary exerts no force on the fluid). To isolate the impact of boundary conditions on hydrodynamic electron flow, we have fabricated a graphene device in a pipe geometry with the first half of the pipe having smooth edges and the second half having jagged edges. Through a combination of simulations and transport measurements with this device, we tune between the two extreme boundary conditions and identify the impact of edge geometry on the flow profile of a viscous electron fluid.

[1] Kumar, R. K., et al. Nature Physics 13(12), 1182 (2017)
[2] Bandurin, D. A., et al. Science 351(6277) 1055 (2016)

–

Presenters

  • Rupini Kamat

    Stanford Univ

Authors

  • Rupini Kamat

    Stanford Univ

  • Arthur W Barnard

    Stanford Univ, Physics, Stanford University

  • Joe Finney

    Stanford Univ

  • Takashi Taniguchi

    National Institute for Materials Science, Japan, National Institute for Material Science, National Institute for Materials Science, National Institute for Materials Science, Tsukuba, Research Center for Functional Materials, NIMS, nims, Advanced Materials Laboratory, National Institute for Materials Science, National Institute for Materials Science, 1-1 Namiki, Tsukuba 305-0044, Japan, NIMS, National Institute for Material Science - Japan, NIMS Tsukuba, National Institute for Materials Science, Namiki 1-1, Ibaraki 305-0044, Japan., National Institute for Materials Science (NIMS), National Institute for Materials Science,Tsukuba, Ibaraki 305-0047, Japan, Advanced Materials Laboratory, NIMS, Japan, National Institute for Materials Science,1-1 Namiki, Tsukuba, 305-0044, Japan, National Institute of Materials Science, National Institute for Materials Science, University of Tsukuba, National Institute for Materials Science, Tsukuba, Japan, National Institue for Material Science, Tsukuba, Advanced Materials Laboratory, NIMS, Advanced Materials Laboratory, National Institute for Materials Science, Tsukuba 305-0044, Japan, Advanced Matrials Lab, NIMS, National Institute for Material Science, Tsukuba, Japan, National institute for materials science, NIMS-Tsukuba, NIMS, Japan, National Institute for Materials Science, Namiki Tsukuba Ibaraki, Japan, Advanced Materials Laboratory, National Institute for Materials Science, Tsukuba, Japan, NIMS Japan, National Institute for Materials Science, Tsukuba, Ibaraki 305-0044, Japan, Research Center for Functional Materials, National Institute for Materials Science, Tsukuba, Ibaraki, Japan, Advanced Materials Laboratory, National Institute of Materials Science, Advanced Materials Laboratory, National Institute for Materials Science 1-1 Namiki, Tsukuba, 305-0044, Japan, National Institute of Material Science, 1-1 Namiki, Tsukuba 305-0044, Japan, National Institute for Material Science (Japan), Physics, NIMS, National Institute of Materials Science, Japan, National Institute of Materials Science, Tsukuba, Ibaraki 305-0044, Japan, NIMS - Tsukuba

  • Kenji Watanabe

    National Institute for Materials Science, Japan, National Institute for Material Science, National Institute for Materials Science, National Institute for Materials Science, Tsukuba, Research Center for Functional Materials, NIMS, nims, Advanced Materials Laboratory, National Institute for Materials Science, National Institute for Materials Science, 1-1 Namiki, Tsukuba 305-0044, Japan, NIMS, National Institute for Material Science - Japan, NIMS Tsukuba, National Institute for Materials Science, Namiki 1-1, Ibaraki 305-0044, Japan., National Institute for Materials Science (NIMS), National Institute for Materials Science,Tsukuba, Ibaraki 305-0047, Japan, Advanced Materials Laboratory, NIMS, Japan, National Institute for Materials Science,1-1 Namiki, Tsukuba, 305-0044, Japan, National Institute of Materials Science, National Institute for Materials Science, University of Tsukuba, National Institute for Materials Science, Tsukuba, Japan, National Institute for Material Science, Japan, National Institue for Material Science, Tsukuba, Advanced Materials Laboratory, NIMS, Advanced Materials Laboratory, National Institute for Materials Science, Tsukuba 305-0044, Japan, Advanced Matrials Lab, NIMS, National Institute for Material Science, Tsukuba, Japan, National institute for materials science, NIMS-Tsukuba, NIMS, Japan, National Institute for Materials Science, Namiki Tsukuba Ibaraki, Japan, NIRM, Advanced Materials Laboratory, National Institute for Materials Science, Tsukuba, Japan, NIMS Japan, National Institute for Materials Science, Tsukuba, Ibaraki 305-0044, Japan, Research Center for Functional Materials, National Institute for Materials Science, Tsukuba, Ibaraki, Japan, Advanced Materials Laboratory, National Institute of Materials Science, Advanced Materials Laboratory, National Institute for Materials Science 1-1 Namiki, Tsukuba, 305-0044, Japan, National Institute of Material Science, 1-1 Namiki, Tsukuba 305-0044, Japan, National Institute for Material Science (Japan), Physics, NIMS, National Institute of Materials Science, Japan, National Institute of Materials Science (NIMS), National Institute of Materials Science, Tsukuba, Ibaraki 305-0044, Japan, NIMS - Tsukuba

  • Marc Kastner

    Stanford Univ, MIT

  • David Goldhaber-Gordon

    Stanford Univ, Physics, Stanford University, Stanford, Department of Physics, Stanford University