Plasma assisted dry reforming of methane: Syngas and hydrocarbons formation mechanisms.
ORAL
Abstract
Plasma reactions of CO2 + CH4 mixtures have been proposed as a suitable process for the dry reforming of methane. Without specific catalysts, most studies report the formation of CO and H2 as main reaction products and arise the question whether CHx radicals coming from CH4 may interact with intermediate species formed by electron impact dissociation of CO2, a critical step for the formation of high added value oxygenated compounds. We have addressed this question studying the CO2 + CH4 plasma reaction in a ferroelectric-moderated packed-bed reactor varying the reactants ratio. Analysis of the reaction products by mass spectrometry and the plasma reaction intermediates by optical emission spectroscopy suggest that few direct cross-link interactions exist between intermediate plasma species issued from CH4 or CO2. This preliminary evidence is corroborated by experiments using CO2 instead CO2 as reactant. The isotope labeling procedure has proved that plasma reaction mechanisms of CO2 and CH4 molecules proceed almost independently, with the formation of small amounts of water and the removal of carbon deposits resulting CH4 plasma decomposition as sole evidences of cross reactions. These results highlight the need of using catalysts to promote specific surface reactions for a better control of the selectivity of the process.
–
Publication: Paula Navascués, Jose Cotrino, Agustín R. González-Elipe, Ana Gómez-Ramírez, Plasma assisted CO2 dissociation in pure and gas mixture streams with a ferroelectric packed-bed reactor in ambient conditions, Chemical Engineering Journal, Volume 430, Part 4, 2022,133066, ISSN 1385-8947, https://doi.org/10.1016/j.cej.2021.133066.<br><br>Paula Navascués, José Cotrino, Agustín R. González-Elipe, Ana Gómez-Ramírez, Plasma assisted dry reforming of methane: Syngas and hydrocarbons formation mechanisms, Fuel Processing Technology, Volume 248, 2023, 107827, ISSN 0378-3820, https://doi.org/10.1016/j.fuproc.2023.107827.
Presenters
-
Manuel Oliva Ramirez
Laboratory of Nanotechnology on Surfaces and Plasma, Instituto de Ciencia de Materiales de Sevilla (CSIC-Universidad de Sevilla), Avda. Américo Vespucio 49, E-41092 Seville (S
Authors
-
Manuel Oliva Ramirez
Laboratory of Nanotechnology on Surfaces and Plasma, Instituto de Ciencia de Materiales de Sevilla (CSIC-Universidad de Sevilla), Avda. Américo Vespucio 49, E-41092 Seville (S
-
Paula Navascués
Laboratory of Nanotechnology on Surfaces and Plasma, Instituto de Ciencia de Materiales de Sevilla (CSIC-Universidad de Sevilla), Avda. Américo Vespucio 49, E- 41092 Seville
-
José Cotrino
Laboratory of Nanotechnology on Surfaces and Plasma, Instituto de Ciencia de Materiales de Sevilla (CSIC-Universidad de Sevilla), Avda. Américo Vespucio 49, E- 41092 Seville
-
Agustín Rodríguez González-Elipe
Laboratory of Nanotechnology on Surfaces and Plasma, Instituto de Ciencia de Materiales de Sevilla (CSIC-Universidad de Sevilla), Avda. Américo Vespucio 49, E- 41092 Seville
-
Ana M Gómez-Ramírez
Laboratory of Nanotechnology on Surfaces and Plasma, Instituto de Ciencia de Materiales de Sevilla (CSIC-Universidad de Sevilla), Avda. Américo Vespucio 49, E- 41092 Seville