Characterization of a Liquid Lithium Pellet Delivery (LLPD) System for ELM Pacing and Lithium Replenishment in NSTX-U

POSTER

Abstract

A new liquid lithium pellet delivery system has been developed that will be used in several Li delivery schemes in NSTX-U. The LLPD is based on dripping Li out of a 300 $\mu $m diameter nozzle. A modulating current and permanent magnets provide a J $\times$ B force that drives the formation of the droplets. It is suggested that the current amplitude sets the size of the drops and the modulation sets the frequency that the drops come out of the nozzle. An alternative method for drop production uses high pressure gas where the pressure sets the frequency, up to 2 kHz, and drop size, 0.6 \textless\ $d_{drop}$ \textless\ 2.0 mm. It's intended to use LLPD to deliver solid Li pellets for the granular injector system, fill the upward facing LITER (U-LITER) being developed and maintain fresh Li during a discharge by injecting Li drops into the plasma, ablating the Li and replenishing the coatings on the PFCs.

Authors

  • Daniel Andruczyk

    University of Illinois Urbana-Champaign, CPMI, Department of Nuclear, Plasma and Radiological Engineering, University of Illinois at Urbana-Champaign, Urbana 61801 USA, CPMIU, Department of Nuclear, Plasma and Radiological Engineering, University of Illinois at Urbana-Champaign, Urbana, IL 61801 USA

  • Lane Roquemore

    Princeton Plasma Physics Laboratory

  • Peter Fiflis

    University of Illinois at Urbana-Champaign, University of Illinois Urbana-Champaign, CPMI, Department of Nuclear, Plasma and Radiological Engineering, University of Illinois at Urbana-Champaign, Urbana 61801 USA

  • David Ruzic

    CPMI, Nuclear, Plasma and Radiological Engineering Department, University of Illinois at Urbana-Champaign, IL 61801 USA, CPMI, Department of Nuclear, Plasma and Radiological Engineering, University of Illinois at Urbana-Champaign, Urbana 61801 USA, University of Illinois Urbana-Champaign, CPMIU, Department of Nuclear, Plasma and Radiological Engineering, University of Illinois at Urbana-Champaign, Urbana, IL 61801 USA