APS Logo

The Whale Fluke Structure of the Viscoelastic Instabilities in a Rectangular Microfluidic Channel

ORAL

Abstract

A non-dilute aqueous suspension of linear chains of polyacrylamide (molecular weight > 15×106) flowing in rectangular microchannels is studied with Doppler Optical Coherence Tomography (D-OCT) and Polarized Optical Microscopy (POM). With increasing elasticity, the flow is shown to undergo a transition to a viscoelastic instability. The unstable flow is characterized by fluctuating non-symmetric velocity fields. Whale fluke resembling regions of high velocity develop along the longer sides of the channel, accompanied by strong velocity fluctuations (rms-amplitudes up to ~20%) in low-speed regions reaching out from the shorter walls. These flow variations are correlated to observable micro-structure patterns in the fluid. An extensive parameter study (concentration 250-10,000 ppm, Weissenberg number 0-320, and Reynolds number 0.001-6.22) shows that the Whale Fluke Instability (WFI) is the result of a complex interplay between shear-thinning, elasticity, and inertia. It is hypothesized that the elasticity drives the velocity fluctuations, and the whale-fluke regions emerge due to shear-thinning in combination with the inhomogeneous shear field. With increased inertia, the fluctuations increase while the asymmetries of the mean field decrease.

Publication: Kasra Amini, V. Krishne Gowda, Sofia Saoncella, Luca Brandt, Shervin Bagheri, Outi Tammisola, Fredrik Lundell, "On the Onset of Instabilities in a Viscoelastic Microchannel Flow – an Experimental Work", in preparation. <br><br>Kasra Amini, V. Krishne Gowda, Sofia Saoncella, Luca Brandt, Shervin Bagheri, Outi Tammisola, Fredrik Lundell, "Experimental Study of the Effects of Viscoelasticity and Surface Structures on the Near-Wall Velocity Profiles using Doppler Optical Coherence Tomography (D-OCT)", in preparation.

Presenters

  • Kasra Amini

    FLOW and Fluid Physic Laboratory, Department of Engineering Mechanics, KTH Royal Institute of Technology, Stockholm, Sweden

Authors

  • Kasra Amini

    FLOW and Fluid Physic Laboratory, Department of Engineering Mechanics, KTH Royal Institute of Technology, Stockholm, Sweden

  • V. Krishne Gowda

    KTH Royal Institute of Technology, FLOW and Fluid Physic Laboratory, Department of Engineering Mechanics, KTH Royal Institute of Technology, Stockholm, Sweden

  • Sofia Saoncella

    FLOW and Fluid Physic Laboratory, Department of Engineering Mechanics, KTH Royal Institute of Technology, Stockholm, Sweden

  • Luca Brandt

    KTH Royal Institute of Technology, KTH, Royal Institute of Technology, FLOW and SeRC (Swedish e-Science Research Centre), Department of Engineering Mechanics, KTH Royal Institute of Technology, Stockholm, Sweden

  • Shervin Bagheri

    KTH Royal Institute of Technology, FLOW and Fluid Physic Laboratory, Department of Engineering Mechanics, KTH Royal Institute of Technology, Stockholm, Sweden

  • Outi Tammisola

    FLOW and SeRC (Swedish e-Science Research Centre), Department of Engineering Mechanics, KTH Royal Institute of Technology, Stockholm, Sweden

  • Fredrik Lundell

    FLOW and Fluid Physic Laboratory, Department of Engineering Mechanics, KTH Royal Institute of Technology, Stockholm, Sweden